• Part#: PIX-525-FO-BUN
• SKU: 213349

Not Available
Share this deal with a friend

The Cisco PIX 525 Failover model is designed for use in conjunction with PIX 525-UR, providing a cost-effective, Active/Standby high-availability solution. It operates in hot-standby mode acting as a complete redundant system that maintains current session state information. With the same hardware configuration as the Cisco PIX 525-UR, it delivers the ultimate in high availability for a fraction of the price.

Main Specifications

-->

Main Specifications

Product Description	Cisco PIX 525 Active/Standby Failover Bundle - security appliance
Device Type	Security appliance
Enclosure Type	Rack-mountable - 2U
Dimensions (WxDxH)	17.5 in x 18.3 in x 3.5 in
Weight	32 lbs
Processor	Intel Pentium III 600 MHz
RAM Installed ( Max )	256 MB ( 256 MB )
Flash Memory Installed (Max)	16 MB flash
Data Link Protocol	Ethernet, Fast Ethernet
Network / Transport Protocol	TCP/IP, IPSec
Remote Management Protocol	SNMP
Features	Firewall protection, DHCP support, NAT support, VPN, PAT support, VLAN support, Syslog support, Stateful Packet Inspection (SPI), DoS attack prevention, content filtering, packet filtering

General
Device Type	Security appliance
Height (Rack Units)	2U
Width	17.5 in
Depth	18.3 in
Height	3.5 in
Weight	32 lbs
Processor / Memory / Storage
Processors Installed	Intel Pentium III 600 MHz
RAM Installed ( Max )	256 MB ( 256 MB ) - SDRAM - DIMM 168-pin
Flash Memory Installed (Max)	16 MB flash
Networking
Form Factor	Rack-mountable
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
Network / Transport Protocol	TCP/IP, IPSec
Routing Protocol	OSPF
Remote Management Protocol	SNMP
Performance	Cleartext throughput : 330 Mbps VPN throughput (AES IPSec) : 135 Mbps
Capacity	Concurrent sessions : 280000 VPN tunnels : 2000
Features	Firewall protection, DHCP support, NAT support, VPN, PAT support, VLAN support, Syslog support, Stateful Packet Inspection (SPI), DoS attack prevention, content filtering, packet filtering
Encryption Algorithm	DES, Triple DES, MD5, AES, IKE
Authentication Method	RADIUS, X.509 certificates, TACACS+
Compliant Standards	IEEE 802.1Q
Expansion / Connectivity
Expansion Slots Total (Free)	3 PCI 2 memory - DIMM 168-pin
Interfaces	2 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x failover - RS-232 - 15 pin D-Sub (DB-15) 1 x management - console - RJ-45
Miscellaneous
Compliant Standards	CE, FCC Class A certified, EN 60950, EN 61000-3-2, UL 1950, IEC 60950, EN 61000-3-3
Power
Power Device	Power supply - internal
Environmental Parameters
Min Operating Temperature	23 °F
Max Operating Temperature	104 °F
Humidity Range Operating	5 - 95%